4.6 Mounting of control and feedback accessories
Solenoid valve and or switch boxes can now be mounted to the actuator. Check the
instructions as shipped with these components for installation, operating and maintenance
instructions.
We recommend to test-cycle the complete assembly to check correct operation.
4.7 Recommended Tubing Sizes
In case the solenoid valve is mounted remotely (i.e. in a central solenoid cabinet) and in
order to supply sufcient ow of air supply to the actuator, the following tubing sizes are
recommended.
Table 9. Tubing Sizes
Actuator size
Runs up to Runs over to
1.2 meters 4 feet 1.2 meters 4 feet
25, 40, 65 6 mm 1/4 inch 6 mm 1/4 inch
100, 150, 200,
350, 600
6 mm 1/4 inch 8 mm 5/16 inch
950, 1600, 2500,
4000
6 mm 1/4 inch 10 mm 3/8 inch
18
To Next Page
Loading...
