Emerson EL-O-Matic F Series - Page 42

Reassembly
Figure 29 Position of the slot and the cam on the pinion top
90°
90°
Assembly code CW Assembly code CC
(Standard; Spring-to-Close) (Reverse; Spring-to-Open)
A
B
A
B
C
C
A = Position of cam
B = Position of slot and dot in pinion
C = Final position of pinion dot
NOTE:
When the pistons are completely moved inwards, the pinion top will show a 5° over travel.
38
September 2017
Installation, Operation and Maintenance Manual
DOC.IOM.EF.EN Rev. 7
Section 9: Reassembly