Emerson FB1100 - ATEX;UKEx Flame-Proof Zone 1 Certifications; Standards Compliance; Special Conditions of Use

UL Safety Instructions for Emerson FB1100 Flow Computers
CD9434A
December 19, 2022
ATEX/UKEx Flame Proof Zone 1 Certifications UL-9
ATEX/UKEx Flame-Proof Zone 1 Certifications
Data Plate — ATEX Ex db/UKEx
Flame-proof
This confirms compliance with the
European ATEX Directive
2014/34/EU as well as the United
Kingdom UKEx regulation UKSI
2016/1107 (as amended by UKSI
2019:696).
The data plate and certain conditions of use are shown. For full details refer to
the Emerson FB1100 Flow Computer Safe Use Instructions (D301768X012).
This device was evaluated according to the following standards:
 IEC 60079-0, 7th Edition
 IEC 60079-1, 7th Edition
 EN IEC 60079-0:2018
 EN 60079-1:2014
Special Conditions of Use / Schedule of Limitations:

Contact your authorized sales and service representative for any
maintenance or repair beyond the maintenance of the FB1100 Flow
Computer. Do not alter or disassemble any of the flameproof joints of the
FB1100 Flow Computer.

The Model 4088 and Model 215 Scalable Pressure Transmitters provided
with the FB1100 flow computers contain a thin-wall diaphragm.
Installation, maintenance, and use must take into account the
environmental conditions to which the diaphragm is subjected. Follow the
manufacturer’s instructions for installation and maintenance to ensure
safety during the device’s lifetime.

Refer to field replacement guides for replacement of the following parts:
Replacement Part Kit Number
Field Replacement
Guide document
number:
End Caps
399122-01-0 and
399123016-KIT
D301814X012
HMI Module Display
Assembly
399379-01-0, 621627011-
KIT, 399380-01-0,
621627020-KIT
D301816X012
CPU Board 399134018-KIT D301802X012
Termination Board
and Terminal Block
399185-01-1, 400216010-
KIT, 395791014-KIT
395803000-KIT
D301820X012
Sensor Assembly Variable Kit Number D301842X012
Coin Cell Battery 395620-03-1 D301854X012