Emerson FB1100 - Direct Mount; Indirect Mount

FB1100 Flow Computer Instruction Manual
D301752X012
November 2023
Installation 23
2.7.3 Direct Mount
Direct mount installations use either a traditional mounting kit or a coplanar mounting kit.
Mount the flow computer directly to the natural gas pipeline only if the pipeline includes a
process manifold.
DANGER
EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-
hazardous. Performing this operation in a hazardous area could result in an explosion.
1. Place taps in the top or side of the line.
2. Mount the flow computer beside or above the taps.
2.7.4 Indirect Mount
You can mount the flow computer to a two-inch pipe or pole. Indirect mount can use the
coplanar, or traditional flange mounting kits.
DANGER
EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-
hazardous. Performing this operation in a hazardous area could result in an explosion.