FB2100 Flow Computer Instruction Manual
D301783X012
November 2023
94 Service and Troubleshooting
Figure 5-7. Loosen Captive Fastening Screws and Rotate Assembly Forward
4.
Remove the battery:
If a hook and loop pad holds the battery, see the instructions in Step 5.
If a strap holds the battery, skip to Steps 6 and 7.
5.
Follow this step if you have the configuration where a hook-and-loop pad on the
back of the battery secures it to the back of the battery compartment (otherwise
skip to Steps 6 and 7). Leave the connectors on the current battery connected. Place
your fingers behind the battery pack and pry it off of the fastener on the back of the
compartment; you may need to use both hands. Gently lift the battery with the
battery cable attached out of the compartment. Now skip to Step 8.
To Next Page
Loading...
