FB2100 Flow Computer Instruction Manual
D301783X012
November 2023
Installation 39
2.10.2.1 Installing the Main Battery Pack
If you purchased one of the battery/solar panel options, you need to install the main
battery pack before you place the device in service.
The device provides a battery cable with two pairs of battery connectors, enabling you to
hot-swap the battery pack in a non-hazardous location. You can use either pair of
connectors when you install the battery.
1.
Remove the battery pack from its packaging.
2.
Remove the plastic tabs covering the connectors on the battery pack.
Figure 2-25. Removing Plastic Tabs from Battery Pack
3.
Open the enclosure.
To Next Page
Loading...
