FB2100 Flow Computer Instruction Manual
D301783X012
November 2023
Installation 43
2.10.2.2 Securing the Battery with a Strap
This type of battery compartment allows for certain accessories to be installed such as a
relay or internal solar regulator.
1. If you have an internal solar regulator installed in the battery compartment, you
must remove its termination cover in order to fit the battery inside. Remove the two
screws (left and right) that fasten the termination cover to the solar regulator, and
then set the termination cover aside. (If you don’t have an internal solar regulator,
skip to Step 2.)
Figure 2-29. Removing Termination Cover of Internal Solar Regulator
2. The battery strap must already be threaded through the holes of the battery
compartment.
Figure 2-30. Battery Strap
To Next Page
Loading...
