Emerson FB2100 - Page 42

FB2100 Flow Computer Instruction Manual
D301783X012
November 2023
28 Installation
1. Attach plastic pole mounting brackets (Item4) to enclosure using split lock stainless
steel washers (Item 1) and torx head screws (Item 2).
2. Apply Loctite 222 Low Strength Purple Threadlocker adhesive sparingly to threads
of U-bolts (Item 5).
3. Use U-bolts (Item 5) to mount enclosure to pole using hex nuts (Item 3). Torque hex
nuts to 30 in-lbs (3.4 N m).
Figure 2-16. Fiberglass Enclosure Pole Mounting
1
¼ inch screw split lock stainless steel washer
2
¼-10 x .75LG thread forming torx head screw
3
5/16-18 keps stainless steel hex nut
4
Pole mounting bracket
5
2 inch diameter 5/16-18 x 4.0LG U-bolt