FB2100 Flow Computer Instruction Manual
D301783X012
November 2023
46 Installation
Figure 2-34. Battery Pack Attached to Compartment
2.
Route the wires of the free portion of the battery cable so that they sit completely
inside the open area at the top of the battery compartment.
3.
Rotate the electronics assembly up against the battery compartment and tighten
the captive fastening screws with a torque value of 2 to 4 in-lbs (0.2 to 0.5 N m) to
close the compartment.
4.
Close the enclosure.
To Next Page
Loading...
