Emerson FB2100 - Page 8

UL Safety Instructions for Emerson FB2100 Flow Computers
CD9436A
December 19, 2022
UL-6 ATEX/UKEx Increased Safety Zone 2 Certifications
ATEX/UKEx Increased Safety Zone 2
Certifications
This document includes notes on ATEX/UKEx certifications. For full details, please refer to the
Emerson FB2100 Flow Computer Safe Use Instructions (D301770X012).
Special Conditions of Use:
 Use equipment in an area of not more than pollution degree 2.
 Make provisions to ensure, in the event of transient disturbances, that the rated voltage does
not exceed 140 percent of the peak rated voltage.
 Lead acid battery, and solar power options are not for use in ATEX/IECx/UKEx applications.
 Impact tests on the display were conducted based on Group II values for the low risk of
mechanical danger, in accordance with Table 15 of both EN IEC 60079-0:2018 and IEC 60079-0
7th Edition. Install flow computers with displays in areas where the risk of impact is low.
 For Zone 2 installations, ensure that the flow computer is installed and used in such a way so
as to prevent the danger of electrostatic charges.
 The FB2100 enclosure must require a tool to permit access.
 Refer to field replacement guides for replacement of the following parts:
Replacement Part Kit Number
Field Replacement Guide
document number:
8-Channel Expansion I/O
Board
400217010-KIT D301804X012
6-Channel Expansion I/O
Board
400215010-KIT D301803X012
HMI Module Display Assembly
399379-01-0, 621627011-
KIT, 399380-01-0,
621627020-KIT
D301822X012
I/O Termination Board
400210010-KIT, 358807010-
KIT
D301805X012
CPU Enclosure and Electronics
621673-01-0, 621674-01-0,
621675-01-0, 621676-01-0,
621678-01-0, 400209010-
KIT, 399260-01-0, 399264-
01-0, 400211010-KIT
D301803X012
Sensor Variable Kit Number D301843X012
Door Accessories
399291-01-0, 399267-01-0,
399266-01-0, 621661010-
KIT, 399394-00-0
D301825X012
Relay 395828-01-0 D301847X012
Coin Cell Battery 395620-03-1 D301855X012