Operation and Display Panel
Liebert
®
GXT4
™
User Manual 30
Control Screen
Select MAIN MENU -> 3 CONTROL to enter the CONTROL screen. This screen has three submenus,
TURN ON & OFF, ALARM CONTROL and BATT TEST, as shown in Figure 3-17.
In the CONTROL screen, press the Up or Down button to move the cursor to the required item, and press
the Enter button to enter its submenu.
Figure 3-17 Control screen
TURN ON & OFF screen
Select MAIN MENU -> 3 CONTROL -> 1 TURN ON & OFF to enter the TURN ON & OFF screen. This
screen shows one of two displays, TURN ON UPS and TURN OFF UPS, depending on the state of the
UPS, as shown in Figure 3-18.
Figure 3-18 Turn UPS On or Off screen
No. Description
1 UPS is off.
2 UPS is on.
1 TURN ON & OFF
2 ALARM CONTROL
3 BATT TEST
TURN OFF UPS
TURN ON UPS BYPASS
To Next Page
Loading...
