Variable Setting
Frequency Output (if licensed) — Power (Internal or External):
— Source:
— Scaling (Frequency Factor or Flow Rate Factor):
— Fault Action:
— Fault Frequency:
Discrete Output (if licensed) — Power (Internal or External):
— Source:
— Scaling:
— Fault Action:
Calibration parameters (for 9-wire installations only)
Flow calibration factor FCF (Flow Cal or Flow Calibration Factor):
Density calibration factors — D1:
— D2:
— K1:
— K2:
— TC:
— FD:
2.3 Power requirements
The 1600 supports DC power or Power Over Ethernet (POE) through the Channel A
Ethernet RJ-45 port.
DC power
• Power range is 18-30 VDC
• Typical power is 3.5 watts
• Maximum power is 8 watts
• Polarity sensitive
POE power
• Power range is 44-57 VDC
• Power Delivery (PD) classification is 3
Cable sizing formula
M = 18V + (R x L x 0.5A)
• M: minimum supply voltage
• R: cable resistance (in Ω/ft)
Installation Manual
Planning
00825-0100-1600 March 2022
Installation Manual 9
To Next Page
Loading...
