Emerson Micro Motion 1600 - Wiring the Channels; Available Channels; Wire the I;O Channel

4 Wiring the channels
4.1 Available channels
Signal Channel A
(1)
Channel B
Channel options EtherNet/IP
ProLink III and the Integrated Web server can always be
connected to Channel A
mA Output
Modbus TCP Frequency Output
Discrete Output
(1) ProLink III and the integrated web server can always be connected to Channel A.
4.2 Wire the I/O channel
The Channel 1600 I/O can be configured as:
• mA Output
• Frequency Output
• Discrete Output
4.2.1
Access the wiring channels
Procedure
Remove the wiring access cover to reveal the I/O wiring terminal block connectors.
Installation Manual Wiring the channels
00825-0100-1600 March 2022
Installation Manual 17