Overview
When you reset an inventory, the transmitter sets its value to 0. It does not matter
whether the inventory is started or stopped. If the inventory is started, it continues to track
process measurement.
Tip
When you reset a single inventory, the values of other inventories are not reset. Totalizer values are
not reset.
Prerequisites
To use ProLink II or ProLink III to reset the inventories, the feature must be enabled.
• To enable inventory reset in ProLink II:
1. Click View > Preferences.
2. Check the Enable Inventory Totals Reset checkbox.
3. Click Apply.
• To enable inventory reset in ProLink III:
1. Choose Tools > Options.
2. Select Reset Inventories from ProLink III.
Transmitter operation
132 Micro Motion
®
Model 1700 Transmitters with Analog Outputs
To Next Page
Loading...
