High-temperature flexible conduit installationFigure F-2:
High-temperature flexible conduit installations use the same installation
instructions as 4-wire remote installations, except that the distance between the
sensor and the electronics is limited by the length of the flexible conduit.
• 4-wire remote – The transmitter is installed remotely from the sensor. You need to
mount the transmitter separately from the sensor, connect a 4-wire cable between
the transmitter and sensor, and connect power and I/O wiring to the transmitter.
4-wire remote installation – painted aluminum housingFigure F-3:
Sensor
Core processor
Transmitter
4-wire cable
Transmitter components and installation wiring
302 Micro Motion
®
Model 1700 Transmitters with Analog Outputs
To Next Page
Loading...
