Emerson Micro Motion 5700 - Wire the mA;HART Multidrop Installation (Internally or Externally Powered)

Figure 4-12: Frequency Output wiring (externally powered)
A
B
E
D
C
A. Frequency Output
B. Channel B or C
C. 5–30 VDC (maximum)
D. 500 mA current (maximum)
E. Counter
4.5.3
Wire the Frequency Output (internally powered)
(Channel D)
Procedure
Wire to the appropriate output terminal and pins.
Figure 4-13: Frequency output wiring (internally powered)
A
7
8
C
B
A. Frequency Output
B. See Figure 4-14 for output amplitude versus load resistance
C. Counter
Wiring the channels Installation Manual
February 2020 MMI-20027478
30 Micro Motion 5700 Transmitters with Configurable Outputs