4 Wiring the channels
4.1 Available channels
Signal Channel A Channel B Channel C Channel D Channel E
Wiring
terminals
1 2 3 4 5 6 7 8 9 10
mA Inputs
and Outputs
mA Output 1
(HART)
mA Output 2 mA Output 3 mA Input RS-485
Frequency
Outputs
Frequency Output
2
(1)
Frequency Output
1
Frequency Output
2
(1)
Discrete
Outputs
Discrete Output 1 Discrete Output 2 Discrete Output 3
Discrete
Inputs
Discrete Input 1 Discrete Input 2
Frequency
Inputs
Frequency Input
(1) Frequency Output 2 can be mapped to Channel B or D. For multiple Frequency Outputs, use Frequency 1 on Channel C
and Frequency 2 on either Channel B or D.
4.2 Access the wiring channels
Procedure
1. Remove the wiring access cover to reveal the I/O wiring terminal block connectors.
Installation Manual Wiring the channels
MMI-20027478 February 2020
Installation Manual 23
To Next Page
Loading...
