Emerson Micro Motion Configuration And Use Manual

Display codes for measurement units (continued)Table B-3:
Code Measurement unit
CUF/MN Cubic feet per minute
CUFT Cubic feet
CUFT/D Cubic feet per day
CUFT/H Cubic feet per hour
CUFT/S Cubic feet per second
CUIN Cubic inches
CUYD Cubic yards
D API °API
DAY Days
DBRIX °Brix
DTWAD °Twaddle
FT Feet
FT/S Feet per second
FTH2O Feet H20 @ 68 °F
FTW4C Feet of water at 4 °C
FTW60 Feet of water at 60 °F
G Grams
G/CM3 Grams per cubic centimeter
G/H Grams per hour
G/L Grams per liter
G/MIN Grams per minute
G/mL Grams per milliliter
G/MOL Grams per mole
G/S Grams per second
G/SCM Grams per square centimeter
HL Hectoliters
HOUR Hours
HPA Hectopascals
HZ Hertz
IN Inches
INH2O Inches of water at 68 °F
INHG Inches of mercury at 0 °C
INW4C Inches of water at 4 °C
INW60 Inches of water at 60 °F
KG Kilograms
KG/D Kilograms per day
Using the transmitter display
170 Micro Motion
®
Fork Density Meters (FDM)

Emerson Micro Motion Specifications

General

Category	Measuring Instruments
Manufacturer	Emerson
Brand	Micro Motion
Type	Coriolis Flow Meter
Output	4-20 mA, HART, Foundation Fieldbus, Profibus, Modbus
Power Supply	24 V DC
Material	Stainless Steel, Hastelloy
Process Connection	Flanged, Threaded
Certifications	ATEX, IECEx, CSA, SIL
Pressure Rating	Varies by model; up to 10, 000 psi (690 bar)
Temperature Range	Varies by model; -400 to 750°F (-240 to 400°C)