Emerson Micro Motion - Chapter 5: Integrate with Rockwell Programming Software; Integrate with Rockwell Versions 20 or Later; Prerequisites for Rockwell Integration; Procedure for Rockwell Integration (v20+)

Transmitter with end-cap and safety spacer removedFigure 3-2:
A
B
A. Transmitter end‐cap
B. Safety spacer
4. Move the HART security switch to the OFF position (up).
The HART security switch is the switch on the left.
HART security switchFigure 3-3:
A
B
A. HART security switch
B. Unused
Introduction to configuration and commissioning
Configuration and Use Manual 15