Instance services: Get Attribute Single
Class attributes
# Access Name Type Value Description
1 Get Revision UINT 0001h Revision 1
Instance attributes
# Access Name Type Description
01h Get Module serial number UDINT Serial number
02h Get Vendor ID UINT Manufacturer Vendor ID
03h Get Fieldbus Type UINT Fieldbus Type
04h Get Module Software
version
UINT Module software version
0Ah Get Module Type UINT Module Type
0Fh Get IN cyclic I/O length UINT Size of I/O Input area (in bytes)
11h Get IN total length UINT Total number of IN bytes supported
12h Get OUT cyclic I/O length UINT Size of I/O Output area (in bytes)
14h Get OUT total length UINT Total number of OUT bytes supported
B.2.8 Parameter Data Input Mapping Object, Class B0h
This object can be used to access Input Data acyclically, and is set up dynamically based on
the Parameter Data Mailbox initialization (see Input parameters (explicit data) for standard
configuration).
Supported services
Class services: Get Attribute All
Instance services: Get Attribute Single
Class attributes
#
Access Name Type Value Description
1 Get Revision UINT 0001h Revision 1
Instance attributes, Instance 01h
Each attribute corresponds to a block of Input Data.
#
Access Name Type Description
01h Get Data Array of USINT Mapped block of Input Data
Device profile User Guide
January 2019 MMI-20019808
42 Micro Motion EtherNet/IP Module