Emerson Rosemount 2051G - Trimming with configuration buttons; Perform trim with LOI (option M4); Perform trim with analog zero and span (option D4)

12
Reference Manual
00809-0300-4410, Rev BA
Configuration
January 2018
Configuration
Table 2-3. Device Dashboard Fast Key Sequence
2.7.2 AMS Device Manager
Right click on the device and select Configuration Properties from the menu. Navigate the tabs to
review the transmitter configuration data.
2.7.3 Local operator interface
Press any configuration button to activate the LOI. Select VIEW CONFIG to review the below parameters.
Use the configuration buttons to navigate through the menu.
The parameters to be reviewed prior to
installation include:
2.8 Verifying process variables configuration
This section describes how to verify that the correct process variables are selected.
2.8.1 Field Communicator
2.8.2 AMS Device Manager
1. Right click the device and select Overview from the menu.
2. Select the All Variables button to display the primary, secondary, tertiary and quaternary variables.
From the HOME screen, enter the Fast Key sequences listed
Function
Fast Key sequence
HART 7 HART 5
Alarm and Saturation Levels 2, 2, 2, 5 2, 2, 2, 5
Damping 2, 2, 1, 1, 5 2, 2, 1, 1, 5
Primary Variable 2, 1, 1, 4, 1 2, 1, 1, 4, 1
Range Values 2, 1, 1, 4 2, 1, 1, 4
Ta g 2, 2, 7, 1, 1 2, 2, 7, 1, 1
Transfer Function 2, 2, 1, 1, 6 2, 2, 1, 1, 6
Units 2, 2, 1, 1, 4 2, 2, 1, 1, 4
 Tag  Primary Variable
 Units  Range Values
 Transfer Function  Damping
 Alarm and Saturation Levels
From the HOME screen, enter the Fast Key sequence
Device Dashboard Fast Keys
3, 2, 1