Emerson Rosemount Analytical X-STREAM Enhanced Series - Setting the Analog Outputs

Emerson Process Management GmbH & Co. OHG 3-19
X-STREAM XE
Short Form Manual
HASXEE-SFM-HS
05/2017
3
Startup
3.8 Checking the Settings
Press left to return to SETUP, and then open
IN/OUTPUTS. and from there enter ANALOG
OUTPUTS.
3.8.4 Setting the Analog Outputs
Select the analog output you like to check.
Note!
The following section only in brief describes
the entries currently of interest!
X-STREAM Enhanced Series instruc-
tion manual, Chapter 6 for a more detailed
description.
Setup..
In/Outputs..
Analog outputs..
"Signal” species the value associated with
the selected output. The following options
(partly dependent on the number of mea-
suring channels and sensors installed) are
available:
Analog Outputs
Output1..
Output2..
Output3..
Output4..
Output5..
Signal: Comp1
OutRange: 0-20 mA
Low Scale: 0.00
High Scale: 100.00
AutoScale: Yes
FailMode: Live
0/4 mA: 0.00
20 mA: 100.00
Hold:
No