Emerson SP4402 - Application Menu 1 Power-Down Saved Integer; Application Menu 1 Read-Only Integer; Application Menu 1 Read-Write Integer; Application Menu 1 Read-Write Bit

Safety
Information
Introduction
Product
information
System
design
Mechanical
installation
Electrical
installation
Getting
started
Optimisation
Parameters
Techn i cal
data
Component
sizing
Diagnostics
Unidrive SP Regen Installation Guide 179
Issue Number: 2 www.controltechniques.com
9.15 Menu 18: Application menu 1
Menu 18 contains parameters that do not affect the operation of the drive. These general purpose parameters are intended for use with fieldbus and
application Solutions Modules. The read write parameters in this menu can be saved in the drive.
18.01 Application menu 1 power-down saved integer
Drive mode Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Range Regen -32,768 to 32,767
Default Regen 0
Update rate N/A
18.02 to 18.10 Application menu 1 read-only integer
Drive mode Regen
Coding Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
1
Range Regen -32,768 to 32,767
Default Regen 0
Update rate N/A
18.11 to 18.30 Application menu 1 read-write integer
Drive mode Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
11
Range Regen -32,768 to 32,767
Default Regen 0
Update rate N/A
18.31 to 18.50 Application menu 1 read-write bit
Drive mode Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Default Regen 0
Update rate N/A