Section 8 • Spare Parts List
VSS/VSM/VSH/VSSH • Installation, Operation and Maintenance Manual • Emerson • 35391SD
Vilter parts get renewed from time to time, so be sure to ask if the part listed in your manual is still the best for your compressor.
Parts that appear on diagrams might be shown separately for reference, but are sold as an assembly or kit only.
8 − 9
Gaterotor
*VSS 2401 thru VSS 3001 Only
12
8
14
5
15
9
4
1
6
10
3
7
11
13
TIGHTEN TO 19 FT-LBS
USE BLUE LOCTITE
USE SHIMS TO ACHIEVE
0.003”- 0.004” SHELF CLEARANCE
TIGHTEN TO 78 FT-LBS
TIGHTEN TO 54 FT-LBS
INSTALL RETAINER WITH BEVEL
FACING GATEROTOR
TIGHTEN TO 33 FT-LBS
TIGHTEN TO 154 FT-LBS
CHECK GATEROTOR FLOAT
AFTER ASSEMBLY
2
To Next Page
Loading...
