1592021021 XC1008-1011-1015D GB A5 r.1.5A 12.10.2009 XC1008-1011-1015D 21/66
5. Set the day by means of the UP and DOWN keys.
6. Push the SET key, to confirm and pass to the setting of time.
7. Use the same procedure for the date.
8. Then confirm the selection by means of the SET key.
NOTE: to memorise the alarms and to enable the automatic energy saving cycle the real
time clock has to be set.
5. Alarms
The controller memorises the last 100 alarms happened, together with their start and finish time. To
see the alarms follow the following procedure.
5.1 Menu Active alarms
If the alarm icon is flashing on the
main display, an alarm is occurring.
Push the ALARM key to enter the alarm menu.
1. Push the ALARM key to enter the ALARM MENU,
2. Select the alarm menu
To Next Page
Loading...
Need help?
General
