1592021021 XC1008-1011-1015D GB A5 r.1.5A 12.10.2009 XC1008-1011-1015D 12/66
3.3 Programming
Push the key and the programming menu is entered.
Parameters are collected in two menu:
Pr1: menu of parameters without password. Press the Pr1 key to enter.
Pr2: menu of parameters with password. If the password is enabled, use the following procedure to
put it.
3.3.1 Password introduction to enter Pr2
If the password is enabled, by pushing the Pr2 key the following interface is displayed:
1. Push the SET key.
2. Use the UP and DOWN keys to set the password
3. Push the SET key to confirm it
4. The following message is displayed
To Next Page
Loading...
Need help?
General
