Eminent EM6350 - 6.0 Camera Web Interface; 6.1 Login via Web Browser

37 | ENGLISH
5.5 Pan/Tilt (Not available for EM6350)
Here you can set the Pan/Tilt: boot preset, Speed and the amount of cruise cycles
1. Pan/Tilt control: move camera: left,right, up and down.
2. Pan/Tilt speed: Adjust the Pan/Tilt speed
3. Save preset: Save a predefined camera position
4. Go to preset: Move camera to predefined camera position
5. Horizontal patrol
6. Vertical patrol
6.0 The webpage of the camera
The Eminent camera is also an IP camera with its own webpage. This means you can
login to the webpage by using the camera’s IP Address. Use the following steps to
login to the webpage and change any of the camera settings.
In the section below, we assume you logged in using Internet Explorer.
The menu will be slightly different when using another browser.
6.1 Login by Web browser
1. Ensure the camera is connected to the network.
2. Retrieve the camera’s IP address and port setting using the LAN search function
of the APP or PC software (Press the “+” to add a camera and choose for the
option “LAN Search” The camera ID will be shown in the list together with IP
address and port number.)
1
2
3 4 5 6