1.1 Packing contents
The following parts need to be present in the packing:
EM6350
Power supply
Splitter Cable
RJ45 coupler
Quick install guide
Network cable
Mounting material: Allen key, screws and plugs
Window sticker
ID/Password card
1.2 Requirements to access the camera.
It is very easy to access the video images of the EM6350 on your smartphone, tablet
or PC. You only need the ID or QR code that is displayed on your bottom label and
download the application for your device. You do not need to remember or setup the
configuration of your modem/router to be able to access the camera.
1.3 Major hardware components.
The major components on the front panel of the EM6350 are:
1. Lens –the focus of the lens is fixed.
2. IR LED – for the Infra-red lighting of the night mode.
3. Power jack – this is the place to plug in the power adapter. The power needed for
this EM6350 is 12V/1A, please make sure you are using the correct power
adapter.
4. Ethernet jack – this is the place to plug in the RJ45 Ethernet cable.
5. WiFi antenna jack – this is the place to mount the WiFi antenna
To Next Page
Loading...