Appendix A, WP29 and WP32 Testing
© 2013 EMP, Inc 25
Installation Description
Test Configuration
Special Conditions:
Test Data Log
Pump Speed (rpm) 0 1000 2000 3000 3500 4000 4300 4600
Pump Current
(Amps)
Pump Voltage
(VDC)
Inlet Pressure
(kPa/psi)
Inlet/Outlet
Temperature (F/C)
Outlet Pressure
(optional)
Flow (optional)
NOTE: If the pump is being used in conjunction with another source of coolant flow (e.g. HVAC Boost Pump) perform
measurements at worst and nominal operating conditions.
NOTE: Complete and submit a log page for each inlet or operational condition with the installation registration
information.
To Next Page
Loading...
Need help?
General
