Purpose
© 2013 EMP, Inc 5
Purpose
The purpose of the WP29 and WP32 installation manual is to present information related to the
pump’s dimensions, electrical specifications, flow and pressure capabilities, coolant guidelines,
recommended plumbing, and system testing. This manual also outlines the WP29 and WP32
limitations that should be recognized and adhered to.
Development Engineer Responsibilities
The organization responsible for incorporating the WP29 and WP32 pump into any system must read
and understand the requirements and specifications as explained in this manual. At any time during
system development, EMP will participate in a design review if requested. Prior to production release
of any system incorporating the WP29 and/or WP32, please take the time to fill out the included
product installation registration form and e-mail to service@emp-corp.com.
EMP engineering will review the intended installation and will contact you if there are any issues seen
in the information provided. It is up to the design engineer to ensure that all requirements are met;
failure to do will void product warranty.
To Next Page
Loading...
Need help?
General
