EMP WP29 - EMP Water Pump Model Codes

Specifications
© 2013 EMP, Inc 8
Identification
The product identification labels are attached to the controller housing next to the electrical interface of the
pump. The pump hardware part and serial numbers are located on the upper label. The lower label identifies
the Programmed Assembly number and the associated control software as the pump leaves the manufacturing
facility. The EMP service tool can be used to confirm the pump software should calibration changes be
required and new identification tags issued.
Label Details
Date Code
Serial Number
Country of Origin
Hardware Part
Number
Bar Code
EMP Programmed
Assembly Number or
Customer Part Number
Software Calibration
Number
Customer optional
information