EasyManua.ls Logo

Empi 300PV - Sports PPR 3; Accessories; Technical Data; Standard Measurement Conditions

Default Icon
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
Ramp-up Time 0 seconds
ON Time 3 seconds
OFF Time 0 seconds
Pulse Rate 100 Hz/ 2 Hz
Pulse Duration 150 s
Channel Cycling Synchronous
3.3.7.3 Sports PPR 3 — Summary
For use in relaxation of muscle spasms.
Details
PRESET PARAMETERS DEFAULT SETTINGS
Waveform Symmetrical Biphasic
Treatment Time 30 minutes
Ramp-up Time 1 second
ON Time 5 seconds
OFF Time 1 second
Pulse Rate 10 Hz
Pulse Duration 300 s
Channel Cycling Synchronous
3.4 Accessories
Battery Type Four AA alkaline batteries- two in device at a time (part number
44800750) or rechargeable NiMH batteries (part number 200033-001).
Electrodes Any Empi electrode with a minimum active area of 5.1 cm
2
(roughly
1" x 1") – (Example: part number 86905220 - Ass'y, Electrode, 5220, 2"
x 2" Square, 4 Pack, (5000 Series), StimCare Carbon FM)
Lead wires Any Empi TENS/NMES lead wire (100 cm – 40”) with the touch
proof device connection (part number 193057-100).
Remote Switches
Use either Empi Foot Switch (part number 198887) or Empi Hand
Switch (part number 57202241).
3.5 Technical Data
3.5.1 Standard Measurement Conditions
Temperature 25°C ± 5°C
Load 1k1
Power Supply 3.0V DC
All tolerances ±10% unless noted.
00962.indd 3200962.indd 32 1/23/07 9:23:03 PM1/23/07 9:23:03 PM

Table of Contents

Related product manuals