EasyManua.ls Logo

Empi 300PV - Timer; Remote Control Switch; Low Voltage Indicator; Physical Characteristics

Default Icon
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.5.5 Timer
Adjustable 5 to 60 minutes or unlimited
3.5.6 Remote Control Switch
Active regimen starts with closed contact
3.5.7 Low Voltage Indicator*
Indicator Threshold: 2.07 Volts (typical)
Shutdown Voltage: 1.77 Volts (typical) 1.50 Volt Minimum
*These voltages may be tested under NO load condition.
3.5.8 Physical Characteristics
Size 1.26" x 3.3" x 4.5"
Weight (with batteries) approximately 8 ounces
3.5.9 Environmental Conditions
Operational temperature 10° C to 40° C
Humidity (maximum) 75% RH
Transport and Storage -40° C to 70° C
Store in cool, dry place.
3.5.10 EN 60601-1 Classification
Type BF Applied Part
Internally powered only
Ordinary protection ingress of liquids
Continuous operation
Not suitable for use in the presence of a flammable anaesthetic
mixture with air or with oxygen or nitrous oxide
38
00962.indd 3800962.indd 38 1/23/07 9:23:12 PM1/23/07 9:23:12 PM

Table of Contents

Related product manuals