Empisal EES10 - Lower thread and thread cutting

12
Raising up the lower thr ead
1. Hold the upper thread with the left hand. Turn
the hand wheel towards you (counterclockwise)
lowering, then raising the needle.
2. Gently pull on the upper thread to bring the
bobbin thread up through the needle plate hole.
The bobbin thread will come up in a loop.
3. Pull both threads to the back under the presser
foot.
Cutting the thr ead
Raise the presser foot.
Remove the fabric, draw the threads to the left
side of the face cover and cut using the thread
cutter.
The threads are cut at the proper length to start
the next seam.