1
4
Reverse/ Auto-stop button (1)
When the patterns 01-06 are selected, the machine will sew
reverse stitch at a low speed if the reverse button is pressed.
The machine will sew forward after the button is released.
When the patterns 07-16, 21-40 are selected, the machine
will immediately sew 3 locking stitches when the reverse
button is pressed, then automatically stop.
Mode selection button (2)
The LED light will be set at pattern mode " " when the
machine is turned on. The light will run by the sequence of
pattern, stitch width, and stitch length mode.
Utility and decorative
pattern mode:
There are 40 patterns for selection 01~40, stitch
selection using the stitch width and length adjustment
buttons.
Stitch width
mode
Adjust the width of the stitch using the stitch width
adjustment buttons.
Stitch length
mode
Adjust the length of the stitch using the stitch length
adjustment buttons.
To Next Page
Loading...
