2.0~5.0
* The twin needle is optional. It is not include
with the accessories.
Insert the twin needle.
Attention: When using twin needles, use the
all purpose
foot
(T) regardless
of
what kind
of
sewing foot will be carried out.
Use only twin needle assemblies with max.
2mm
needle distance.
Follow the instructions for single-needle threading
using the horizontal spool pin. Thread through the
left needle.
Set the second spool pin (included with the
accessories) into the hole on the top of the
machine. Thread through remaining points,
making certain to omit the thread guide above the
needle and pass thread through the right needle.
Thread each needle separately.
Please note: Make sure that the two
thr
e
ads
used to thread the twin needle are of the same
weight.
You
can use one or two
colors
Before sewing adjust the stitch width, Turn the hand
wheel to check the needle clearance, so that needle
does not hit the needle plate.
When sewing with twin needle, always proceed
slowly, and make sure to maintain a low speed to
insure quality stitching.
Select a stitch pattern and start to sewing.
Utility and decorative patterns 01-16, 21-40 can
be used.
Sewing result will be a pattern with two parallel
stitch lines.
Please Note: When sewing with twin needle,
always proceed slowly, and make sure to
maintain a low speed to insure quality stitching.
To Next Page
Loading...
