Empress Effects ECHOSYSTEM - Control Functions; Delay Time, Mix, and Output Controls

Controls at a Glance
thing 1 & thing 2: these two
controls take on dierent
functions depending on the
mode. They control things like
modulation depth and speed,
saturation, panning, lter, and
reverb controls
Check the mode reference chart
to see which function they
perform in a given mode.
mix: sets the ratio of wet signal
(delay) to dry signal (unaected).
Counterclockwise is 100% dry,
clockwise is 100% wet, with 50/50
being somewhere around 2 o’clock.
output: controls the overall
output volume for the pedal.
12 o’clock is unity.
delay time | ratio: controls
the delay time. in tap mode, it
controls the ratio of the delay
time relative to the tempo
that is tapped.
scroll: press to scroll through
presets, then engage the preset
with the tap switch.
tone: use to apply EQ to the
delay line. center is neutral.
bypass: engage or bypass the
pedal. Can be set for true bypass
or buered bypass in advanced
conguration.