Announced in RIP: This parameter determines if the ADSL router includes the router to this
remote node in its RIP broadcasts. If you choose Yes, the router in this remote node will be
propagated to other hosts through RIP broadcasts. If you choose No, this route is kept private
and is not included in the RIP broadcasts.
When you are done making changes, click on SAVE to save your changes, DELETE to
delete the rule with the parameters you set, BACK to return to the previous screen or CANCEL
to exit without saving.
7.3 NAT
Network Address Translation (NAT) is a method for disguising the private IP addresses
you use on your LAN as the public IP address you use on the Internet. You define NAT rules that
specify exactly how and when to translate between public and private IP addresses. Simply
select this option to setup the NAT function for your ADSL router.
Virtual Circuit (VC): The Virtual Circuit (VC) properties of the ATM VC interface identify a unique
path that your ADSL/Ethernet router uses to communicate via the ATM-based network with the
telephone company central office equipment.
NAT Status: This filed shows the current status of the NAT function for the current VC.
52
Number of IPs: This field is to specify how many IPs are provided by your ISP for current VC. It
can be single IP or multiple IPs.
To Next Page
Loading...
Need help?
General
