Rule Index: The Virtual server rule index for this VC. You can specify up to 10 rules. All the VCs
with single IP will use the same Virtual Server rules.
Start & End port number: Enter the specific Start and End Port number you want to forward. If
it is one port only, you can enter the End port number the same as Start port number. For
example, set the FTP Virtual server, you can set the start and end port number to 21.
Local IP Address: Enter the IP Address for the Virtual Server in LAN side.
Virtual Server Listing: This is a listing of all virtual servers your have set.
When you are done making changes, click on SAVE to save your changes, DELETE to delete
the rule with the parameters you set, BACK to return to the previous screen or CANCEL to exit
without saving.
57
To Next Page
Loading...
Need help?
General
