Current Date/Time: This field displays an updated Date and Time when you reenter this menu.
[Time Synchronization]
Synchronize time with: You can choose “NTP Server automatically”, “PC’s Clock”, or
“Manually” to coordinate the time.
Time Zone: Choose the Time Zone of your location. This will set the time difference between
your time zone and Greenwich Mean Time (GMT).
Daylight Saving: Choose “Enabled” or “Disabled” to use daylight savings time.
NTP Server Address: Type the IP address or domain name of your timeserver. Check with your
ISP/network administrator if you are unsure of this information.
A Network Time Protocol (NTP) server can automatically set the router time for you. If you use
an NTP server, you will only need to select your time zone. If you manually set the time, you can
enable Daylight Saving. The router will automatically adjust when Daylight Saving goes into
effect.
When you are done making changes, click on SAVE to save your changes or on CANCEL to exit
without saving.
73
To Next Page
Loading...
Need help?
General
