Endress+Hauser Deltabar FMD72 - Page 19

Deltabar FMD71, FMD72 Overview of the operating menu
19
Expert → Measurement → Current Output Direct access Description
Set LRV 056
013
166
168
(→  25)
Get URV (only "Pressure") 016 (→  26)
Set URV 057
014
067
169
(→  25)
Startcurrent 134 (→  47)
Curr. trim 4mA 135 (→  47)
Curr. trim 20mA 136 (→  48)
Offset trim 4mA 137 (→  48)
Offset trim 20mA 138 (→  48)
Expert → Communication → HART Config Direct access Description
Burst mode 142 (→  49)
Burst option 143 (→  50)
Current mode 144 (→  50)
Bus address 145 (→  50)
Preamble number 146 (→  51)
Expert → Communication → HART Info Direct access Description
Device ID (read only) 279 (→  62)
Device Revision (read only) 108 (→  40)
Manufacturer ID (read only) 103 (→  40)
Hart Version (read only) 180 (→  57)
Descriptor 139 (→  49)
HART message 140 (→  49)
HART date 141 (→  49)
Expert → Communication → HART Output Direct access Description
Primary value is (read only) 147 (→  51)
Primary value (read only) 148 (→  51)
Secondary val.is (read only) 149 (→  52)
Secondary value (read only) 150 (→  52)
Third value is (read only) 151 (→  52)
Third value (read only) 152 (→  53)
4th value is (read only) 153 (→  53)
4th value (read only) 154 (→  54)