Endress+Hauser Deltabar FMD72 - Installing Sensor Modules

Overview of the operating menu Deltabar FMD71, FMD72
20
Expert → Communication → HART Input Direct access Description
HART input value (read
only)
155 (→  54)
HART input stat. (read
only)
179 (→  57)
HART input unit (read only) 156 (→  54)
Expert → Diagnostics Direct access Description
Diagnostic code (read only) 071 (→  37)
Last diag. code (read only) 072 (→  37)
Reset logbook 159 (→  55)
Reset peakhold 161 (→  56)
Pmax process LP 289 (→  65)
Pmin process LP 290 (→  65)
Operating hours (read only) 162 (→  56)
Config. counter (read only) 100 (→  40)
Sensor changes (read only) 287 (→  64)
Expert → Diagnostics → Sensor HP Direct access Description
Min. meas.press. (read
only)
073 (→  37)
Counter P < Pmin (read
only)
262 (→  58)
Max. meas.press. (read
only)
074 (→  37)
Counter P > Pmax (read
only)
263 (→  59)
Min. meas. temp. (read
only)
264 (→  59)
Max. meas. temp. (read
only)
265 (→  59)
Expert → Diagnostics → Sensor LP Direct access Description
Min. meas.press. (read
only)
266 (→  59)
Counter P < Pmin (read
only)
267 (→  60)
Max. meas.press. (read
only)
268 (→  60)
Counter P > Pmax (read
only)
269 (→  60)
Min. meas. temp. (read
only)
270 (→  60)
Max. meas. temp. (read
only)
271 (→  61)