Endress+Hauser Deltabar FMD72 - Installation

Overview of the operating menu Deltabar FMD71, FMD72
18
Expert → Measurement → Linearization Direct access Description
Lin. mode 037 (→  33)
Unit after lin. 038 (→  33)
Line number 039 (→  34)
X-value: (edit mode)
Y-value: (semi-automatic) X
-Wert: (read only)
040
193
123
(→  34)
X-value: (edit mode)
Y-value: (semi-automatic) Y
-Wert: (read only)
041
041
194
(→  34)
Edit table 042 (→  35)
Tank description 173 (→  57)
Tank content (read only) 043 (→  35)
Expert → Measurement → Sensor Limits Hp Direct access Description
LRL sensor 101 (→  40)
URL sensor 102 (→  40)
Expert → Measurement → Sensor Limits Lp Direct access Description
LRL sensor 272 (→  61)
URL sensor 273 (→  61)
Expert → Measurement → Sensor Trim HP Direct access Description
Lo trim measured 129 (→  46)
Hi trim measured 130 (→  46)
Lo trim sensor 131 (→  47)
Hi trim sensor 132 (→  47)
Expert → Measurement → Sensor Trim LP Direct access Description
Lo trim measured 275 (→  61)
Hi trim measured 276 (→  62)
Lo trim sensor 277 (→  62)
Hi trim sensor 278 (→  62)
Expert → Measurement → Current Output Direct access Description
Output current (read only) 054 (→  36)
Alarm behav. P 050 (→  35)
Alarm cur.switch (read
only)
165 (→  56)
Output fail mode
Output fail mode (read
only)
190
051
(→  58)
High alarm curr. 052 (→  36)
Set min. current 053 (→  36)
Get LRV (only "Pressure") 015 (→  26)