Endress+Hauser Deltabar FMD72 - Page 17

Deltabar FMD71, FMD72 Overview of the operating menu
17
Expert → Measurement → Basic Setup Direct access Description
Pos. zero adjust
Calib. offset
007
008
(→  24)
Damping switch (read only) 164 (→  56)
Damping value
Damping value (read only)
017
184
(→  26)
Press. eng. unit 125 (→  45)
Temp. eng. unit 126 (→  45)
Sensor temp. HP (read only) 110 (→  41)
Sensor temp. LP (read only) 283 (→  63)
Electronics temp (read only) 128 (→  46)
Expert → Measurement → Pressure Direct access Description
High press. side 183 (→  58)
Set LRV 013 (→  25)
Set URV 014 (→  25)
Meas.Diff.Press. (read only) 020 (→  27)
Sensor press. HP (read only) 109 (→  41)
Sensor press. LP (read only) 280 (→  62)
Meas. press. HP (read only) 281 (→  63)
Meas. press. LP (read only) 282 (→  63)
Corrected press. (read only) 172 (→  57)
Expert → Measurement → Level Direct access Description
Level selection 024 (→  28)
Unit before lin. 025 (→  29)
Height unit 026 (→  29)
Calibration mode 027 (→  30)
Empty calib.
Empty calib. (read only)
028
011
(→  30)
Empty pressure
Empty pressure (read only)
029
185
(→  30)
Empty height
Empty height (read only)
030
186
(→  31)
Full calib.
Full calib. (read only)
031
012
(→  31)
Full pressure
Full pressure (read only)
032
187
(→  31)
Full height
Full height (read only)
033
188
(→  32)
Density unit 127 (→  46)
Adjust density
Adjust density (read only)
034
189
(→  32)
Process density
Process density (read only)
035
181
(→  32)
Level before Lin (read only) 019 (→  27)