Endress+Hauser Deltapilot M FMB51 - 4 Wiring; 4.1 Connecting the Device

Deltapilot M FMB50/51/52/53
Endress+Hauser 31
Installation height H, devices with a thread
EN/DIN flanges, connection dimensions as per EN 1092-1/DIN 2527
P01-FMB70xxx-06-09-xx-xx-002
Flange with raised face
H: device height = height of device without flange h + flange thickness b
Height H, see → ä 33.
F31 housing F15 housing
156 mm (6.14 in) 148 mm (5.83 in)
D
k
b
g
2
g
H
2
h
Flange
1)
Boltholes
Version Material
2)
Nominal
diameter
Nominal
pressure
Shape
3)
Diameter Thick-
ness
Diameter
of raised
face
Height
of
raised
face
Quant-
ity
Diameter Hole
circle
Flange
weight
4)
Dbg f g
2
k
[mm] [mm] [mm] [mm] [mm] [mm] [kg]
CEJ AISI 316L DN 40 PN 10/16 B1 (C) 150 18 88 2 4 18 110 2.6
CFJ AISI 316L DN 50 PN 10/16 B1 (C) 165 18 102 2 4 18 125 3.3
CGJ AISI 316L DN 80 PN 10/16 B1 (C) 200 20 138 2 8 18 160 5.1
CHJ AISI 316L DN 100 PN 10/16 B1 (C) 220 20 158 2 8 18 180 6.3
1) The roughness of the surface in contact with the medium, including the sealing surface of the flanges, is R
a
0.8 μm (31,5 μin). Lower surface roughness
available on request.
2) Endress+Hauser supplies DIN/EN stainless steel flanges as per AISI 316L (DIN/ EN material number 1.4404 or 14435). With regard to their stability-
temperature property, the materials 1.4404 and 1.4435 are grouped together under 13E0 in EN 1092-1: 2001 Tab.18. The chemical composition of the two
materials can be identical.
3) Designation as per DIN 2526 in brackets
4) Weight incl. pipe and measuring cell, housing weight, see → ä 40