Endress+Hauser Deltapilot M FMB51 - 4.2 Connecting the Measuring Unit

Deltapilot M FMB50/51/52/53
Endress+Hauser 33
JIS flanges, connection dimensions as per JIS B 2220 BL, raised face RF
P01-FMB70xxx-06-09-xx-xx-002
Flange with raised face, material: AISI 316L (1.4435)
H: device height = height of device without flange + flange thickness b
Height H, see → ä 33.
Installation height H, devices with flange
D
k
b
g
2
g
H
2
h
Flange
1)
1) The roughness of the surface in contact with the medium, including the sealing surface of the flanges (all standards),
is R
a
0.8 μm (31,5 μin). Lower surface roughness available on request.
Boltholes
Vers
ion
Nominal
diameter
Nominal
pressure
Diame
ter
Thick
ness
Diameter
of raised
face
Height of
raised
face
Quantity Diameter Hole
circle
Flange
weight
2)
2) Weight incl. pipe and measuring cell, housing weight, see → ä 40
Dbg f g
2
k
[mm] [mm] [mm] [mm] [mm] [mm] [kg]
KEJ 40 A 10 K 140 16 81 2 4 19 105 2.1
KFJ 50 A 10 K 155 16 96 2 4 19 120 2.5
KGJ 80 A 10 K 185 18 126 2 8 19 150 3.8
KHJ 100 A 10 K 210 18 151 2 8 19 175 4.9
F31 housing F15 housing
165 mm (6.5 in) 157 mm (6.18 in)