Endress+Hauser Deltapilot M FMB51 - Page 34

Deltapilot M FMB50/51/52/53
34 Endress+Hauser
Universal adapter
P01-FMB70xxx-06-09-xx-xx-003
material: b = top section AISI 316L (1.4404), a = bottom section AISI 316L (1.4435);
Surface roughness of the surfaces in contact with the medium R
a
≤ 0.76 μm (30 μin) as standard. Lower surface roughness
available on request.
1Version UPJ
1)
: universal adapter incl. silicone molded seal, EHEDG, 3A Class I, FDA CFR 21§177.2600,
USP Plastic Class VI-70C; Order no.: 52023572
Version UNJ
1)
: universal adapter incl. EPDM molded seal, EHEDG, FDA CFR 21§177.2600;
Order no.: 71100719
2Version UQJ
1)
: universal adapter, 6 inch extension including silicone molded seal, EHEDG, 3A,
FDA CFR 21§177.2600, USP Plastic Class VI-70C
Version UOJ
1)
: universal adapter, 6 inch extension including EPDM molded seal, EHEDG,
FDA CFR 21§177.2600
Installation height H, devices with universal adapter
Anderson adapter
P01-FMBX0xxx-06-09-xx-xx-000
Material: b = top section AISI 316L (1.4404), a = bottom section AISI 316L (1.4435), slotted nut AISI 316L (1.4404);
Surface roughness of the surfaces in contact with the medium R
a
≤ 0.76 μm (30 μin) as standard. Lower surface roughness
available on request.
1 Version USJ: Anderson adapter short 2-3/16", incl. silicone molded seal, 3A, FDA CFR 21§177.2600
2 Version UTJ: Anderson adapter long 6-1/2", incl. silicone molded seal, 3A, FDA CFR 21§177.2600
Installation height H, devices with Anderson adapter
ø43.5
H
ø43.5
H
a
b
a
b
➀➁
1) Endress+Hauser supplies these slotted nuts in stainless steel AISI 304 (DIN/EN material number 1.4301) or in AISI 304L (DIN/EN material number 1.4307).
F31 housing F15 housing
Universal adapter 196 mm (7.72 in) 189 mm (7.44 in)
Universal adapter with 6 inch extension 307 mm (12.1 in) 299 mm (11.8 in)
H
ø2" ø2"
ø3"
ø3"
H
a
b
a
b
➀➁
F31 housing F15 housing
Anderson short 204 mm (8.03 in) 196 mm (7.72 in)
Anderson long 314 mm (12.4 in) 306 mm (12 in)