Incoming acceptance and product identification iTEMP TMT112
10 Endress+Hauser
6
iTEMP
®
TMT82
Made in Germany 2012 D-87484 Nesselwang
Install per XA0xxxxT/09/a3/xx.xx
1
2
3
4
5
A0040384
1 Nameplate of DIN rail transmitter (example, Ex version)
1 Product name
2 Order code, extended order code and serial number, firmware version, data matrix 2D code, 2 lines for
the TAG name
3 Configuration
4 Power supply and current consumption, output, approval in hazardous area with connection data
5 Approval logos
6 Manufacturer ID
3.2.2 Name and address of manufacturer
Name of manufacturer: Endress+Hauser Wetzer GmbH + Co. KG
Address of manufacturer: Obere Wank 1, D-87484 Nesselwang oder www.endress.com
Address of manufacturing plant: See nameplate
3.3 Scope of delivery
The scope of delivery of the device comprises:
• Temperature transmitter
•
Additional documentation for devices which are suitable for use in the hazardous area (0
1), such as:
• XA00018R/09/a3
• XA00022R/09/a3
• ZD031R/09/EN
• ZD037R/09/EN
3.4 Certificates and approvals
The device left the factory in a safe operating condition. The device complies with the
requirements of the standards EN 61 010-1 "Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use" and with the EMC requirements as per the
IEC/EN 61326 series.
To Next Page
Loading...
