iTEMP TMT112 Repair
Endress+Hauser 25
8.4 Firmware history
Revision history
The firmware version (FW) on the nameplate and in the Operating Instructions indicates the
device release: XX.YY.ZZ (example 01.02.01).
XX Change to main version. No longer compatible. The device and Operating
Instructions change.
YY Change to functions and operation. Compatible. The Operating Instructions
change.
ZZ Fixes and internal changes. No changes to the Operating Instructions.
Date Firmware version Changes Documentation
10/2001 01.01.zz Original firmware BA01854T/09/en/03.19
9 Repair
Repair is not envisaged for this measuring device.
9.1 Spare parts
Spare parts currently available for the device can be found online at:
http://www.products.endress.com/spareparts_consumables. Always quote the serial number
of the device when ordering spare parts!
Type Order number
Commubox FXA195 HART
®
, for intrinsically safe HART
®
communication with FieldCare via the USB
interface.
FXA195-...
9.2 Return
The requirements for safe device return can vary depending on the device type and national
legislation.
1. Refer to the website for more information:
http://www.endress.com/support/return-material
2. Return the device if repairs or a factory calibration are required, or if the wrong device
was ordered or delivered.
To Next Page
Loading...
