11 Operation using PROFIBUS
®
PA TMT84
86 Endress + Hauser
Extended
diagnostics
read Manufacturer-specific diagnostics information encoded in
bits. Several messages are possible.
See the "Status diagnostics bits" at the end of this manual.
Extended diagnos-
tics mask
read Displays the bit mask that outputs the manufacturer-spe-
cific diagnostic messages.
(only visible in
online mode)
Enabled features read FEATURE.Enabled:
X=0
Accumulative status and diagnostics sup-
ported/diagnostics as per Profile 3.01/3.0;
X=1
Diagnostics as per Profile 3.02/extended sta-
tus/diagnostics are supported;
Factory settings:
X=1
(only visible in
online mode)
Supported features read FEATURE.Enabled:
X=0
Accumulative status and diagnostics sup-
ported/diagnostics as per Profile 3.01/3.0;
X=1
Diagnostics as per Profile 3.02/extended sta-
tus/diagnostics are supported;
Factory settings:
X=1
Setting condensed
status diagnostics
read /
write
Displays whether "Condensed Status & Diagnostic Mes-
sages" is used.
0=Status and diagnostics as described in Profile 3.01
1=Support for accumulative status and diagnostics
2-255=Reserved for the Profibus User Organization
(PNO)
Factory settings:
1
(only visible in
online mode)
Service locking read/
write
Configuration for enabling the ENP service parameters.
Diagnostics
Menu item Parameter
"Diagnostics" Name
Parame-
ter access
Description
To Next Page
Loading...
